Nikon Tripods / Heads | Microphones / Headphones / Speakers | Creators Accessory  Kit  for Z30

AT A GLANCE

Improve your audio quality with the Rode VideoMicro microphone while the SmallRig Tripod Grip doubles as a handle and tabletop support and accommodates Nikon’s own ML-L7 Bluetooth Remote Control for wireless camera control.

Rode VideoMicro Ultracompact Camera-Mount Shotgun Microphone

Switch from using the built-in mic on your camera or portable recorder to the Rode VideoMicro ultracompact camera-mount shotgun microphone for improved sound quality and wind noise reduction without adding heft to your rig. Since it runs on plug-in power and has no controls or switches, the VideoMicro is a simple and reliable microphone ideal for mobile journalists, vloggers, and run-and-gun shooters.

This ultracompact and ultralightweight shotgun microphone features a detachable shockmount that mounts directly to your DSLR, mirrorless, or video camera and reduces noise from vibrations and camera handling. The supplied furry windshield minimizes wind noise, making it well suited for outdoor shoots. The detachable coiled 3.5mm TRS cable ensures easy hookup to your camera, and the dual-mono output means that no channel selection is necessary on your recording device.

 

Durable and Small

At just 3″ long and 1.5 ounces light, the VideoMicro is an unobtrusive companion for your camera. Its ceramic coating mitigates glare and its durable aluminum body aids in RF rejection.

Shotgun Mic with Directional Sound Pickup

Whereas most built-in camera microphones pick up sound from all directions, this microphone utilizes a cardioid polar pattern to focus on sound in front of it while attenuating sound entering from the rear. Its active electronics and directional condenser element deliver more detailed audio than the mics typically found in cameras and portable recorders.

Easy Hookup to Camera

A detachable coiled 3.5mm cable is supplied for fast hookup to your camera. The cable is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder.

Runs on Plug-In Power

No batteries are required to operate the VideoMicro. Just connect the microphone to your camera or recorder, enable plug-in power on the device, and forget about swapping or charging batteries.

Detachable Shockmount Inhibits Vibrations

Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to utilize a rugged Rycote Lyre suspension-style shockmount. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. Plus, the bottom of the shockmount features a camera shoe mount with a 3/8″ thread, ensuring easy attachment to your camera or a boompole such as Rode’s Micro Boompole (available separately).

Furry Windshield Minimizes Wind Noise

The VideoMicro includes a furry windshield to minimize unwanted wind noise from breezes, fans, heaters, and air conditioners.

Connectivity Options

Expand the microphone’s device compatibility with Rode accessories such as the SC4, SC7, and VXLR+ (all available separately). With either the SC4 or SC7, you can connect the VideoMicro directly to a smartphone or tablet equipped with a 3.5mm TRRS jack. The VXLR+ adapter is the ideal solution when you want to record the VideoMicro to a camcorder or mixer that has XLR inputs.

Microphone

Form Factor  Stand/Boom Mount

Sound Field  Mono

Operating Principle  Pressure Gradient

Capsule  Electret Condenser

Diaphragm  0.5″ / 12.70 mm

Polar Pattern  Cardioid

Orientation  End Address

Circuitry Solid-State (JFET)

Pad  None

High-Pass Filter  None

Tone Adjustment  None

Gain Adjustment  None

Indicators  None

On-Board Controls  None

Windscreen  Windsock/Windjammer (Included)

Performance

Frequency Range  100 Hz to 20 kHz

Maximum SPL  140 dB SPL

Off-Axis Rejection  2 dB at 60°
  14 dB at 120°
  24 dB at 180°

Sensitivity  -33 dBV/Pa at 1 kHz

Dynamic Range  120 dB

Signal-to-Noise Ratio  75 dB A-Weighted

Equivalent Noise Level  20 dB A-Weighted

Connectivity

Output Connectors (Analog)  1 x 1/8″ / 3.5 mm TRS Female (on Mic)

Headphone Connector  None

Cable Length  6.69 to 15.75″ / 17 to 40 cm

Number of Conductors  2

Power

Operating Voltage  2 to 5 V (Plug-In Power)

Physical

Color  Black

Mounting  Camera/Shoe-Mount, Shockmount (with Included Hardware)

Included Case  None

Construction Material  Metal

Dimensions  ø: 0.83 x L: 3.15″ / ø: 21 x L: 80 mm

Weight  1.48 oz / 42 g

Rode VideoMicro Ultracompact Camera-Mount Shotgun Microphone
• Lyre Shoe Shockmount
• Rode SC2 Right-Angle 3.5mm TRS Coiled Patch Cable
• Rode WS9 Deluxe Windshield for Rode VideoMicro & VideoMic Me (Gray)
• SmallRig Tripod Grip for Nikon ML-L7 Bluetooth Remote Control
• Nikon ML-L7 Bluetooth Remote Control