RODE Video Accessories | Microphones / Headphones / Speakers | NT-USB+ Professional USB Microphone

AT A GLANCE

The studio-grade capsule evokes the sound of a classic large-diaphragm condenser microphone, delivering warmth and clarity, with a full frequency response and tight cardioid polar pattern for clear, focused audio; use it on a wide range of sources from vocals and speech to acoustic guitar and other instruments. The NT-USB+ features a class-compliant USB-C connector for use with computers as well as iOS and Android tablets and smartphones.

 

Revolution Preamp & APHEX-Powered DSP

• The Rode NT-USB+ is a revised version of the original NT-USB mic, upgraded with a built-in Revolution preamp and a DSP chip for vocal processing.
• The high-gain, low-noise Revolution preamp provides 20 dB of gain to ensure a robust signal level for the 24-bit / 48 kHz analog to digital converter.
• A built-in DSP chip allows the mic to process your vocals internally without taxing your computer’s processor and incurring latency.
• Apply advanced APHEX audio processing via Rode’s free podcasting and streaming software, Rode Connect. This includes a high-pass filter for cutting out low-end rumble, a noise gate for eliminating background noise, a compressor for delivering punchy and balanced sound, and the legendary Aural Exciter and Big Bottom effects for rich, broadcast voice tone.

 

Easy-to-Use, Performance-Ready Features

• Podcasters will appreciate the cardioid polar pattern, which naturally reduces room noise by rejecting much of the audio to the back and rear of the mic capsule.
• The included pop filter attaches to the microphone and minimizes p-pops and plosives.
• A 3.5mm headphone jack with volume control is provided for latency-free monitoring, and musicians will appreciate the Mix Control dial, as it allows them to balance the level between their vocals and pre-recorded instruments.
• Mount the NT-USB+ to the included mini tripod for instant desktop use.
• A ring mount for your own mic stands is provided along with a 9.8′ USB-C to USB-C cable to connect to a computer or mobile device.

Primary Applications  Studio Recording, Podcast, Web-Streaming, Recording to Mobile Device, Conferencing

Form Factor  Stand/Boom Mount

Intended Sound Sources  Speech/Voice Over, Instrument

Sound Field  Mono

Operating Principle  Pressure Gradient

Capsule  None

Polar Pattern  Cardioid

Orientation  Side Address

Circuitry  Solid-State

Pad  None

Tone Adjustment  None

Gain Adjustment  None

On-Board Controls  Direct Monitor Blend, Headphone Volume

Frequency Range  20 Hz to 20 kHz

Maximum SPL  118 dB SPL (10% THD)

Dynamic Range  97 dB

Output Connectors (Analog)  None

Output Connectors (Digital)  1 x USB-C Female (on Mic)

Headphone Connector  1 x 1/8″ / 3.5 mm

Wireless Connectivity  None

Bluetooth  None

Digital Audio

A/D Conversion  24-Bit

Sample Rate  48 kHz

Digital Signal Processing  Compressor, EQ, Noise Reduction, Sound Presets (via Software)

OS Compatibility  Windows, macOS, iPadOS, Android
*As of November, 2022: Check with manufacturer for the most up-to-date compatibility

Power

Bus Power  USB

Operating Voltage  5 V (USB Bus Power)

Operating Current Consumption  500 mA

Color  Black

Mounting  Desktop Stand, Mic Clip/Stand Adapter (with Included Hardware)

Included Case  None

Included Filters  Pop Filter

Dimensions  H: 2 x W: 2.4 x L: 7.2″ / H: 50 x W: 62 x L: 184 mm

Weight  1.2 lb / 540 g (Microphone, without Mount, without Windscreen)

RODE NT-USB+ Professional USB Microphone

• Pop Shield
• Tripod Desk Stand
• Ring Mount
• USB Cable (9.8′)